DPC1000 Polycarbonate - Suzhou Mingrise Materials Technology Co., Ltd.

DPC1000 Polycarbonate

PC (Polycarbonate) is one of the few transparent resins among general-purpose engineering plastics. It features low water absorption, good dimensional stability, and high strength—particularly excellent impact resistance—with minimal creep. Although its electrical properties are also very good, its chemical resistance is relatively poor, and it is prone to stress cracking under pressure.

199 8483 3918

Material Properties Table

Key Features

Excellent transparency, widely used for optical applications and prototype materials
Excellent impact resistance, heat resistance and low-temperature performance
PC (BK) is a light-shielding grade

Application Areas

Widely used in semiconductors, aerospace, automobile manufacturing, medical devices, energy, industrial and other fields.

Product Lineup

DPC1000 (NC)

Unit [mm]

Sheet

Thickness	Width	Length
8~100	500	1,000
8~40	600	1,200

DPC1000 (BK)

Unit [mm]

Sheet

Thickness	Width	Length
8~100	500	1,000

Note: Custom sizes available

Specifications

Performance Parameters

	Test Item	Test Method	Test Conditions	Unit	SABO™ DPC1000
Mechanical Properties	Tensile Strength	ISO 527-1, 2	-	MPa	60
	Tensile Elongation	ISO 527-1, 2	-	%	108
	Flexural Strength	ISO 178	2mm/min	MPa	93
	Flexural Modulus	ISO 178	2mm/min	GPa	2.3
	Poisson's Ratio	-	-	-	0.38
	Pendulum Impact Test	ISO 179/1eA	-	KJ/m²	88
	Rockwell Hardness	ISO 868	23℃	R	R123
Thermal Properties	Heat Deflection Temperature Under Load	ISO 75-1,2	-	℃	133
	Long-Term Operating Temperature	-	-	℃	115
	Glass Transition Temperature	-	-	℃	130~155
Electrical Properties	Dielectric Strength	IEC60243-1	-	MV/m	18
	Surface Impedance	IEC60093	-	Ω	10¹⁵
	Volume (Intrinsic) Impedance	IEC60093	-	Ω · cm	10¹⁴
	Permittivity	IEC60250	106HZ	-	3
	Dissipation Factor (Tan δ)	IEC60250	106HZ	-	0.009
Physical Properties	Density	ISO 1183	23℃ , 4℃ H2O	-	1.20
	Water Absorption	-	23℃ , 24Hr	%	0.24
	Coefficient of Linear Thermal Expansion	ISO 11359-2	-	*10⁻⁵/℃	6.5~6.6
	Flammability	UL94	0.5mm	-	HB

* The above values are typical measured values and are not guaranteed.